Open the calculator Cutting plan
| Section | h mm | b mm | tw mm | tf mm | A cm² | m²/m | kg/m | kg / 12 m |
|---|---|---|---|---|---|---|---|---|
| INP 80 | 80 | 42 | 3.9 | 5.9 | 7.57 | – | 5.9 | 71 |
| INP 100 | 100 | 50 | 4.5 | 6.8 | 10.60 | – | 8.3 | 100 |
| INP 120 | 120 | 58 | 5.1 | 7.7 | 14.20 | – | 11.1 | 134 |
| INP 140 | 140 | 66 | 5.7 | 8.6 | 18.20 | – | 14.3 | 171 |
| INP 160 | 160 | 74 | 6.3 | 9.5 | 22.80 | – | 17.9 | 215 |
| INP 180 | 180 | 82 | 6.9 | 10.4 | 27.90 | – | 21.9 | 263 |
| INP 200 | 200 | 90 | 7.5 | 11.3 | 33.40 | – | 26.2 | 315 |
| INP 220 | 220 | 98 | 8.1 | 12.2 | 39.50 | – | 31.0 | 372 |
| INP 240 | 240 | 106 | 8.7 | 13.1 | 46.10 | – | 36.2 | 434 |
| INP 260 | 260 | 113 | 9.4 | 14.1 | 53.30 | – | 41.8 | 502 |
| INP 280 | 280 | 119 | 10.1 | 15.2 | 61.00 | – | 47.9 | 575 |
| INP 300 | 300 | 125 | 10.8 | 16.2 | 69.00 | – | 54.2 | 650 |
| INP 320 | 320 | 131 | 11.5 | 17.3 | 77.70 | – | 61.0 | 732 |
| INP 340 | 340 | 137 | 12.2 | 18.3 | 86.70 | – | 68.1 | 817 |
| INP 360 | 360 | 143 | 13 | 19.5 | 97.00 | – | 76.1 | 914 |
| INP 380 | 380 | 149 | 13.7 | 20.5 | 107.00 | – | 84.0 | 1,008 |
| INP 400 | 400 | 155 | 14.4 | 21.6 | 118.00 | – | 92.6 | 1,112 |
| INP 425 | 425 | 163 | 15.3 | 23 | 132.00 | – | 103.6 | 1,243 |
| INP 450 | 450 | 170 | 16.2 | 24.3 | 147.00 | – | 115.4 | 1,385 |
| INP 475 | 475 | 178 | 17.1 | 25.6 | 163.00 | – | 128.0 | 1,535 |
| INP 500 | 500 | 185 | 18 | 27 | 179.00 | – | 140.5 | 1,686 |
| INP 550 | 550 | 200 | 19 | 30 | 212.00 | – | 166.4 | 1,997 |
| INP 600 | 600 | 215 | 21.6 | 32.4 | 254.00 | – | 199.4 | 2,393 |
Calculation formula
kg/m = section area (cm²) × 0.785. For HEA, HEB, HEM and IPE the area is calculated exactly from h, b, tw, tf and the root radius r per EN 10365; for INP, UPN and UPE the manufacturers’ tabulated area is used.Working out a whole order?
Put the products in the calculator’s materials list and see the total weight and cost of the order.