Square tube 250x250x10 weight – kg/m, kg per bar

Weight per metre72.66kg/m

6 m bar436.0kg

12 m bar872.0kg

Metres per tonne13.8m

Painting surface0.957m²/m

Calculate another length Add to the materials list

Side: 250 mm
Wall thickness: 10 mm
Cold-formed, EN 10219: 72.66 kg/m
Hot-finished, EN 10210: 74.52 kg/m
Section area: 92.57 cm²
Outer surface: 0.957 m²/m
Outer surface: 0.957 m²/m

Weight by length

Length	Steel	Stainless 304	Aluminium
1 m	72.66 kg	73.41 kg	24.99 kg
2 m	145.33 kg	146.81 kg	49.99 kg
3 m	217.99 kg	220.22 kg	74.98 kg
4 m	290.66 kg	293.62 kg	99.97 kg
5 m	363.32 kg	367.03 kg	124.96 kg
6 m	435.99 kg	440.43 kg	149.96 kg
8 m	581.32 kg	587.24 kg	199.94 kg
10 m	726.65 kg	734.05 kg	249.93 kg
12 m	871.98 kg	880.86 kg	299.92 kg

How it was calculated

The weight is the section area multiplied by the material density:

kg/m = section area (mm²) × 0.00785. The area comes from side and thickness, minus the rounded corners: for cold-formed tube (EN 10219) the outer radius is 2t up to 6 mm wall, 2.5t up to 10 mm and 3t above; for hot-finished tube (EN 10210) the outer radius is 1.5t.

For Square tube 250×250×10, the section area is 92.57 cm², so 1 metre = 92.57 × 0.785 = 72.665 kg.

The real weight can differ by a few percent because of rolling tolerances. For other materials or lengths use the calculator.

Other square tube sizes

Square tube 250×250×5 Square tube 250×250×6 Square tube 250×250×8 Square tube 250×250×10 Square tube 250×250×12.5 Square tube 70×70×10 Square tube 80×80×10 Square tube 90×90×10 Square tube 100×100×10 Square tube 120×120×10 Square tube 140×140×10 Square tube 150×150×10 Square tube 160×160×10 Square tube 180×180×10 Square tube 200×200×10 Square tube 300×300×10 Full table →

Working out a whole order?

Add Square tube 250×250×10 to the materials list and see the total weight and cost of the order, together with the other products.

Add to the materials list

Cutting bars of square tube 250×250×10?

A cutting program arranges the pieces on bars with minimal waste and uses stock offcuts first. See also how to reduce cutting waste.

Cutting program

Frequently asked questions

How much does one metre of Square tube 250×250×10 weigh?

One metre of steel Square tube 250×250×10 weighs 72.66 kg.

How much does a 6 m bar of Square tube 250×250×10 weigh?

A 6 m bar weighs 436.0 kg and a 12 m bar 872.0 kg.

How many metres of Square tube 250×250×10 are in one tonne?

One tonne contains about 13.8 metres.

Square tube 250×250×10 mm weight